收藏本頁 您好,歡迎來到上海采松,我們將竭誠為您服務!    工作時間:上午 9:00 - 下午 18:00 溫馨提示:
EHS 網站
熱門搜索:
防火柜、化學品柜、工業鎖具、盛漏托盤、吸附棉套裝等工業與環保產品;實驗臺、實驗室家具、通風柜、實驗柜等實驗室設計規劃、生產、安裝及配件;離心機、防爆工具、烘箱、超聲波清洗機、水質監測儀器及實驗室耗材等共3大類產品。
產品分類
品牌專區 >>更多
您現在的位置:
首頁 > 產品中心 > **防護 > 泄漏防護及儲運 > 盛漏托盤
產品資料

防泄漏托盤可叉車

如果您對該產品感興趣的話,可以 sendmsg
產品名稱: 防泄漏托盤可叉車
產品型號: 1230 1231
產品廠商: UltraTech溢漏圍堵/雨水管理/施工合規性/公共設施保護
產品文檔: 無相關文檔
簡單介紹
    

ultratech歐泰克防泄漏托盤可叉車,四桶托盤,黃色,黑色格柵,堅固耐用,適合冷庫房使用。防泄漏托盤可叉車聯系采松咨詢

防泄漏托盤可叉車 的詳細介紹

防泄漏托盤可叉車

描述:

1、聚乙烯材質

2、黃色托盤,黑色防滑格柵

3、適合大部分化學品

4、耐用堅固,壽命長

5、溫度范圍-40度-71度,適合低溫、環境,冷庫房,惡劣的氣溫

規格:

四桶防泄漏托盤

型號:1230無排放口,1231帶排放口

尺寸:1295*1295*254mm

承重:2722kg

容量:250L

自重:36kg

MAINTENANCE AND CARE
UltraTech Polyethylene Spill Containment Products
1. There is no specific need to clean an UltraTech Spill Containment product that has not had a spill or leak as the polyethylene plastic material
it is constructed from is designed to last for years in most indoor or outdoor environment.The polyethylene has a UV protective additive for prolonged outdoor exposure.
2. The products are rated for use in temperatures from -40° F to 160° F.
3. The sump area of the product should be inspected weekly for any spills or leaks. If a spill or leak is discovered, it should be cleaned up
within 24 hours. If inspection shows the sump area has a crack or hole or other damage that could affect the functionality of the unit, it
should be immediately removed from service.
4. To clean up a spill or a leak, use all safety precautions required for handling the particular chemical involved. Using a safe pumping
method for the chemical involved, pump the spilled contents out of the containment sump and into a drum or container for proper disposal
or reuse. If the chemical involved is not safe to pump, use absorbents or other means to remove the chemical from the containment
sump safely. Dispose of any chemicals, used sorbents or other disposables in compliance with your local or federal regulations.
5. Once the chemical has been removed, use a sorbent mat or pad to wipe down the inside of the containment unit to remove any remaining
chemical residue. Finish by washing with soap and water and allow the unit to dry before placing back into service.
6. The unit’s grating should be cleaned of any residual chemical and cleaned with soap and water.
7. If the unit had a drain plug that was removed to drain off any chemical or soap/water, be sure to replace the drain plug securely.

8. Ultra-Spill Deck Bladder System special instructions:

a. Use a hand pump with a ?” diameter tube and insert the tube into the opening of the bladder from inside the Spill Deck after removing the grate.
b. Pump the contents of the bladder and the Spill Deck into a drum or container for proper disposal or reuse.
c. If there is some remaining residue inside the bladder, lift the outside end of the bladder and allow the residue to pour back into the Spill Deck sump where it can be pumped out or absorbed with sorbents.
d. Remove the bladder from the Spill Deck by uncrewing the bulkhead fitting and dispose of the bladder properly according to local and federal regulations. DO NOT REUSE A BLADDER. After the Spill Deck has been cleaned up, place a new bladder into the Bladder Attachment and attach it to the Spill Deck following the instructions that accompany the replacement bladder.

產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!

Copyright? 2003-2024  上海采松實驗室設備有限公司版權所有
電話:021-69106488 021-69106624 傳真:021-69106489 地址:上海市松江區廣富林路658弄3號寫字樓1410室 郵編:201620

滬ICP備13012389號-1  
  

滬公網安備 31011402005026號